Toshiba WRC-1000 & Tomato

Discussion in 'Tomato Firmware' started by potatosalad, Apr 18, 2011.

  1. potatosalad

    potatosalad Guest

    I have a Toshiba WRC-1000 that I was successfully able to install Tomato. I replaced the included wifi card with a Broadcom card (DW1370?) that I pulled from my Dell 600m laptop but I could not get the WAN side to work. I also was able to install DD-WRT and it was fully functional. When I installed DD-WRT it recognized the router as a Siemens SE505 v1. I also read in a post with a Rosewill RNX-GX4 you could run this command to get the WAN side sorted out.

    nvram set vlan1ports="0 5"
    nvram commit

    So my questions are:

    1. Can I run a command like the one mentioned above to get the WAN port working properly under Tomato. If yes, what is it?

    2. There are some Broadcom wifi adapters on eBay. Will any of the Mini-PCI G cards work?
    This one is common

    Thanks for the help :3
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice