Tranparent Modem/Router Bridge Suddenly Not Working

Discussion in 'Cisco/Linksys Wireless Routers' started by Xplorer4x4, May 15, 2012.

  1. Xplorer4x4

    Xplorer4x4 LI Guru Member

    I had problems with my ATT DSL connection and called ATT. ATT rebuilt the line and I still have connection issues. However, they claim the issue is on my end and want an arm and a aleg to tell me how to configure my connection because I refuse to use the faulty offical Motorola modem. So I decided to reset my modem(Actiontec GT724R) and router (E2000 with latest Toastman build of TomatoUSB) and reconfigure the transparent bridge. So from a default state, I log in to the Modem's IP and choose PPoE and enter my username and password. No problem, everything works great with out the router. Now I select transparent bridge, and hook up the router. Now I should be able to access the modem IP, right? Well instead windows claims there is an IP conflict. I have done these steps several times before, and it worked fine, but not this time. Can any one tell me where I am going wrong?

    Sent from my DROID 2 Global
  2. Xplorer4x4

    Xplorer4x4 LI Guru Member

    smethrony, thanks for the reply. I actually resolved the issue by assigning a static IP address to my PC. Then I was able to connect to the router.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice