Transmission 1.91 for ASUS RT-N16

Discussion in 'Tomato Firmware' started by Troydm, Feb 25, 2010.

  1. Troydm

    Troydm Addicted to LI Member

    Ok it's my attempt to cross compile latest stable transmission, after some messing around in source code i have a working result (beta test), tested it on ASUS RT-N16 tomato beta05.

    ok to use it just copy this thing on the router or anywhere you want (external usb hard drive for example), unpack it, cd to bin folder.
    chmod +x ./*

    then open your browser http://your_router_ip_here:9091

    I'm to lazy to write a full guide. use it on your own risk

    p.s. compiled againts mips32r2 so might work on some other routers (WNR3500L maybe) testing is needed
  2. teosard

    teosard Guest

    bad link upload it again please
  3. Troydm

    Troydm Addicted to LI Member

  4. shibby20

    shibby20 Network Guru Member

    simply install optware and install transmission from nslu2 :)

    quick tutorial:
    - mount flashdrive or harddisc partition as /opt
    cd /tmp
    chmod +x

    add this twwo line to init script:
    echo "export PATH=/opt/bin:/opt/sbin:$PATH" > /root/.profile
    echo "unset LD_LIBRARY_PATH" >> /root/.profile

    save and reboot router. After reboot run
    ipkg update

    and you can now install optware :)

    how install transmission?
    ipkg install transmission

    and done.
  5. Troydm

    Troydm Addicted to LI Member

    what version of transmission will it install?
  6. shibby20

    shibby20 Network Guru Member

  7. Bobi

    Bobi Addicted to LI Member

    Troydm :I installed and run ./ then ...........

    Couldn't read "/mnt/SAMSUNG/Downloads/torrents/.config/transmission-daemon/settings.json": Not a regular file

    file is there............ what's wrong?
  8. Troydm

    Troydm Addicted to LI Member

    strange it shouldn't be ok since file is there, i don't think it's permissions related.

    try running
    cat /mnt/SAMSUNG/Downloads/torrents/.config/transmission-daemon/settings.json

    it should print out the file, if not then you have some strange problems
    also you might try removing .config directory completly.

    it is also strange that transmission is looking for a .config file in that direction.
    because inside ./ i provide a --conf-dir param so it should load a config file from package

    for example
    you are in directory /mnt/app (your applications directory)

    pwd should print out /mnt/app

    you have file ready to be installed (full path /mnt/app/
    unzip ./
    cd ./transmission/bin

    in that case transmission should load the config file from
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice