Trouble with wireless channels with TeddyBear mod Build 39

Discussion in 'Tomato Firmware' started by lapon, Nov 27, 2009.

  1. lapon

    lapon Guest

    Hey! Sorry for the trouble but I have been having some problems with my wireless router. I have a two year old Asus WL-500gp v2 and flashed it with the latest build, as of writing, of the TeddyBear mod for Tomato 1.25. Its build 39. Previously I had flashed with build 37 and had the same problem. I also have a laptop with an Intel WiFiLink 5300 a/g/n. When I set the router to use channel 1, I cannot see it. I can if I set it to channel 6. I have tested all 14 channels using inSSISer and the only ones I don't pick up are 1-4 and 14. Any suggestions? The area where I live is saturated at channel 6 and 11 typically so I would like to avoid them if at all possible. Thanks for your time!

    I have attempted to reboot the router between changes and the behavior doesn't change. I am going to try the new Tomato build, 1.26, and will report if that fixes the problem.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice