upgrade 1.06 -> 1.10 problem

Discussion in 'Tomato Firmware' started by aliencowfarm, Oct 9, 2007.

  1. aliencowfarm

    aliencowfarm LI Guru Member

    I have upgraded my router (wrt54g v2) from tomato 1.06 to 1.10. But afterwards i am not able to do anything on the Internet. I am able to get a IP from my ISP. When i go back to a default configuration the problem will not go away. rebooting/reseting both ends doesn't help either.
    I also had this problem when trying to upgrade to 1.07, 1.08 and 1.09.
    I had to go back to 1.06 with my old configuration.

    Does anybody have clue to solve this?

  2. danix71

    danix71 LI Guru Member

    We hope and wish to help, but...Finally what's your problem ? :confused:
  3. roadkill

    roadkill Super Moderator Staff Member Member

    this looks like his problem
  4. danix71

    danix71 LI Guru Member

    So, it has to do with the Dnsmasq (Custom Configuration).
  5. mstombs

    mstombs Network Guru Member

    The first 5 lines of my dnsmasq.conf are

    so line 2 is is the domain name I have for my local lan - so I can address my router etc with names of the sort wrt54gs.lan - these come from the basic Identification settings webpage, not custom dnsconfig

    I'd recommend the reset to defaults with thorough erase nvram option then type only required info in.
  6. aliencowfarm

    aliencowfarm LI Guru Member

    Looks like it's working now :S i don't know what i did... but what ever it was it worked. But i do know that i haven't touched the DNS configuration before.
    Thanks guys for helping me :)
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice