Urgent Help! Change DHCP server default gateway

Discussion in 'Networking Issues' started by ITSuper_Hero, Apr 15, 2005.

  1. ITSuper_Hero

    ITSuper_Hero Network Guru Member

    I have a small network that has a the router as to other networks/Internet. My plan was to install the WRT54G V3 as a Wireless Access point and use it to assign IP address via DHCP to LAN and Wireless users.

    Although the wireless and DHCP works my default gateway is which is the WRT54G address. I need to change the DHCP default gateway to be Does anyone know how do do this or a firmware that will allow me to do this?

    I am under pressure to get this working as soon as possbile so I hope you can respond quickly. Thank you very much for any suggestions!
  2. toofgib

    toofgib Network Guru Member

    Not sure about this model, but in another Linksys model, you can change how the router behaves. Try in the admin interface (Setup --> Advanced Routing) switching the WRT54G from gateway to router mode. This is how things are changed with the RV042. If it's not there, try looking in other menus to make the switch.
  3. ITSuper_Hero

    ITSuper_Hero Network Guru Member

    It has the option and I have set it to "Router" but it still does not let me change the DHCP assigned to clients default gateway. So if the gateway remains the WRT54G I then have to set a static route. The problem is it won't let me do a statement that routes all traffic to address. I need like a wild card * to
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice