Using WRT54GC to extend signal?

Discussion in 'Cisco/Linksys Wireless Routers' started by IsLNdbOi, Feb 3, 2006.

  1. IsLNdbOi

    IsLNdbOi Network Guru Member

    I have a WRT54G and a WRT54GC. The WRT54G is my main wireless router and it works pretty well, but I still have some dead spots in my home. Can I use the WRT54GC to extend the signal / reach of the WRT54G?
  2. IsLNdbOi

    IsLNdbOi Network Guru Member

  3. vincentfox

    vincentfox Network Guru Member

    Run an ethernet cable from LAN port on G to LAN port on GC. If you can't run cable then get a couple of PowerLine Network bridge and use household A/C wiring for backbone.

    GC settings:

    Set to different static IP on same subnet.
    Turn off DHCP server.
    Set to same SSID and encryption
    Use channel that is 5 away from channel of other unit


    Or just put better antenna on the G.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice