VPN Hop questions...

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by k2technologies, Dec 30, 2006.

  1. k2technologies

    k2technologies LI Guru Member

    This is the first time I have been asked to hop through VPN's so I am unsure exactly what to ask....

    Office #2 connects to Office #1 (This VPN works great).
    Office #1 connects to LOB Vendor (This VPN works great).
    I need traffic from Office #2 to get to one IP address in LOB Vendor without creating a VPN tunnel between #2 and LOB Vendor.

    Why you ask?? There is LOB app at the vendor that we use and we are charged by the vendor per VPN tunnel into their site. We only want to pay for one tunnel into the LOB app.

    Is there a way to set this inside of one of the RV042s? Or a route statement at the workstations in Office #2?

    Thanks for any help! I hope I made sense here.. :biggrin:

  2. ifican

    ifican Network Guru Member

    I dont know of anyway to get non-enterprise class devices to do this. Heck enterprise class devices dont most of the time like to route back out the same interface a vpn tunnel is terminated on when the packet is arriving via that interface. I have done it with cisco but i have never gotten it to work this way on linksys unless you rdp to a machine and then go to the app from the machine that you rdp'd too.
  3. k2technologies

    k2technologies LI Guru Member

    Thanks! I was getting the feeling that it was not possible as I could find nothing in any of my searches..
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice