wag54 wrong subnet

Discussion in 'Other Linksys Equipment' started by DevilWAH, Jul 6, 2005.

  1. DevilWAH

    DevilWAH Network Guru Member

    i just upgraded to the firmware but it was also happening before.
    when i connect up to my dsl (ZEN)
    the router connects on the correct ip address and with a subnet of now i have 8 static ips so shouldnt it connect on as a sub net of
    and when i try to set up public ips on my computer it wont work.

    any one got some simple instructions for setting it up.
    surely its just a case of assing one of the free ips (not broadcast or network name) to the pc.
    turning on routing and pointing the pc to the routers ip as a gate way?
    come on waht am i missing?

    oh and turning on remote admin to the ip range of the pc.
  2. TazUk

    TazUk Network Guru Member

    First step is to go to Advanced Routing and disable NAT then assign one of your public IP's to the LAN address of the router. If your going to set the addresses manually on the PC's turn off the routers DHCP server otherwise change it's range to fit in with your public IP's.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice