wag54g info

Discussion in 'Other Linksys Equipment' started by DeathWolf, Nov 11, 2005.

  1. DeathWolf

    DeathWolf Network Guru Member

    Hello all,

    I am currently using a wag54g which is working rather well despite being a v1.2(using latest firmware). The only point i've been annoyed at is that i cant get any info on the synchronization noise and noise margin as well as attenuation, ie the dsl link info. All the firmware gives is link speed and encapsulation. Is there any way to get that info? should it be ssh, telnet, http, or anything else i dont mind,

    thanks for any help,


    The only info is the following i'm getting:
    Status: Up
    Downstream Rate: 3648 Kbps
    Upstream Rate: 864 Kbps
    Encapsulation: RFC 2516 PPPoE
    VPI: 8
    VCI: 35
    Multiplexing: LLC
  2. HiSpeed

    HiSpeed Network Guru Member

  3. DeathWolf

    DeathWolf Network Guru Member

    url not working
  4. HiSpeed

    HiSpeed Network Guru Member

    Sorry that was the original, try this one !
  5. DeathWolf

    DeathWolf Network Guru Member

    thx, works pretty well
    i wish linksys could integrate it to the firmware though^^

    btw, is there any way to activate a telnet or some way to get into the router without recompiling a complete firmware
  6. maka_szn

    maka_szn Network Guru Member

    Looks handy.
    What a pity it's apparently not working with ver.2 - unless I'm doing something wrong.
    Is there similar script for ver.2?
  7. jrjove

    jrjove Network Guru Member

    It doesn't work with mine :sad:
  8. HiSpeed

    HiSpeed Network Guru Member

    It works only with Wag 1.x... I think !

    It works only with firmware 1.02.7 or more... I think !
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice