WAG54G Port Forwarding

Discussion in 'Other Linksys Equipment' started by berryb10, Sep 4, 2004.

  1. berryb10

    berryb10 Network Guru Member

    Trying to forward port 3389. Seems to work sometimes but more often than not it fails. After reading the problems with this router I will try forward port range option. I have not found a lot of info about the single port forwarding problem so any advice or links would be good. I have version 1.01.9 and don't have major problems besides the wireless dropping off sometimes. Not a big issue for me, sounds like a major for some. After reading of ploblems of other versions of firmware I am not to keen on upgrading unless there is good reason to do so. OS is XP Pro.
    Cheers 8)
  2. Toxic

    Toxic Administrator Staff Member

    there obviously was a problem with port forwarding... on looking back on the news i posted a while back..


    Firmware version 1.02.2

    - Fixed single port forwarding will fail if "External Port" is different from "Internal Port".
    - Fixed Intel UPnP tool not being able to scan the device
    - Fixed Wireless Clients not being able to get IP via DHCP Relay
    - Added support for SNMPv2c
    - Added "Remote Upgrade" UI
    - Fixed PPTP passthrough problems
    - Fixed issue with Nortel VPN clients not being able to connect to Gateway using certificates
    - Fixed disconnection issue during large file FTP download when using IPSec passthrough(UDP)

    1.02.2 was buggy and they did release a 1.02.3 after that.

    1.02.3 is here: ftp://ftp.linksys.com/international/firmware/WAG54G_AnnexA_ETSI_v1.02.3_02_code.bin
  3. berryb10

    berryb10 Network Guru Member

    Thanks for the reply. Will give that version a go.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice