WAG54G v1.2 (firmware 1.01.6) - ethernet connection problem

Discussion in 'Other Linksys Equipment' started by hgbecker, Aug 31, 2006.

  1. hgbecker

    hgbecker LI Guru Member

    I've got the WAG54G v1.2 (firmware 1.01.6) and wireless works perfectly BUT for some reason only one PC can connect to the router using an ethernet cable (and the connection speed shown on the icon is only 10Mb). :mad: (I've tried different cables and ports).

    Does anyone have an idea on how to get ethernet going again?
  2. HiSpeed

    HiSpeed Network Guru Member

    The switch is probably dead !

    See here !
  3. hgbecker

    hgbecker LI Guru Member

    Thanks for the help - using this I got all back online setting at 10 Mbps half duplex.
  4. nealgs

    nealgs Network Guru Member

    yep, if that's the max you can get then the ethernet controller in the router is knackered.

    How old is your WAG54G???

    Same thing happened to mine - just recieved my replacement WAG54GS from linksys.

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice