WAG54G v1.2 no internet after firmware update

Discussion in 'Other Linksys Equipment' started by Spikke, Sep 28, 2005.

  1. Spikke

    Spikke Network Guru Member

    Hello everyone!
    I have a wierd problem.
    Last sunday upgraded my gateway to firmware WAG54G_AnnexA_ETSI_v1.02.1_09_code.bin wich was downloaded from linksys portuguese site.

    Everything work fine but no internet connection, although dsl link is up! Reset, factory defaults, turn off and on, nothing fixed the problem.
    Yesterday i've been in this forum and downloaded several firmware that were not in Linksys Portugal.

    Tried them all:
    Still no internet connection.

    Finally downgraded to WAG54G_AnnexA_ETSI_v1.01.7_0304_code.bin and everything is ok now (this was the original firmware).
    The problem is this firmware don't let me connect to company VPN with a certificate, and sometimes when i'm downloading big files it just hungs and i have to turn it off and on again. I thing these newer firmwares have that problem fixed, but with no internet its hard to verify that! :)
    Any help would be appreciated.
  2. HiSpeed

    HiSpeed Network Guru Member


    It's the first time I hear a such thing !
    Did you do a sufficient long hard reset ?
    Did you check VPI, VCI, Multiplexing ?
  3. Spikke

    Spikke Network Guru Member

    Yes, yes and yes.
    Before i did the upgrade, i write every thing in a paper.
    Checked and double checked.

    What is a long enough reset? Just until every light turns off...

    The moment i did the downgrade, internet just connects!
  4. HiSpeed

    HiSpeed Network Guru Member

    Do you use TFTP to upgrade ?
    Try this one : WAG54G-FR_AnnexA_ETSI_v1.02.7_03_code.bin it works fine on mine !
  5. Spikke

    Spikke Network Guru Member

    No. Don't know what that is.
    Just used firmware update from the linksys.

    It's better with TFTP?
  6. HiSpeed

    HiSpeed Network Guru Member

  7. Spikke

    Spikke Network Guru Member

    Thanks a lot!
    Will try it tonight.

    But its better to upgrade with this?
    More reliable?
  8. HiSpeed

    HiSpeed Network Guru Member

    Yep !
  9. Spikke

    Spikke Network Guru Member

    Sorry to ask...
    In TFTP field "Server" it's the wag ip?

    In password its admin password? With no user?
  10. HiSpeed

    HiSpeed Network Guru Member

    Yep, yep, yep ! :D
  11. Spikke

    Spikke Network Guru Member

    Bad luck!
    It's the same thing with tftp... everything work except internet access.

    But when i go back to WAG54G_AnnexA_ETSI_v1.01.7_0304_code.bin and it reboots internet is up, no reset, no factory default, and no power down!

    Well i think i have to live with this...

    Thanks anyway.
  12. nick_squonk

    nick_squonk Network Guru Member

  13. booly

    booly Network Guru Member

    I've a similar issue with version > 1.02.7 ( DSl sync and rerain constantly) I solve the issu by asking fr a RMA. Now I'm happy wt my V2.
  14. Spikke

    Spikke Network Guru Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice