WAG54G v1.2 Problem

Discussion in 'Other Linksys Equipment' started by Axi, Jan 23, 2007.

  1. Axi

    Axi Network Guru Member

    I am using WAG54G as I mentioned;
    I have serious problems. I am a user from Turkiye.

    I couldnt have find the firmware that has a lot of talking about the WAG54G V1.2 - 1.03.0 Beta 4 . Can someone send me or give the link for the download?

    I know my cables are just fine! No problems with them.

    Let me write down my problems and wait answers from you;

    1. I am using the firmware 1.02.1. Which one is stable?
    I wonder if I can find the original one..

    2. If I only use the wireless there is no problem but when I connect
    a device with LAN ports the problem starts. I cant use 100mbps
    speed even when I connect the cable there is no light start to turn on
    on the front of the modem. When I reduce the speed to 10mbps it starts
    to work and the light goes on in front. What is the problem?

    3. After dropping the speed to 10mbps and start using both wireless and
    cable connection after a time passes and this is nearly 30minutes. The connection drops , the internet goes down and I cant connect to any site
    or the modem but there is no change about the lights in front they are all
    green. I cant get into internet again if I wont restart the modem.

    4. There wasnt anyproblems like these with the original firmware all of these
    started with the firmware upgrade. How can I find the original?

    5. If the updates going to make is worse why do they make new firmwares?

    Thanks for your interest and taking time.
  2. dotwin

    dotwin LI Guru Member

  3. Neo_Giles24285

    Neo_Giles24285 LI Guru Member

    heat is the killer with these routers, RMA it with linksys
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice