wag54gs & Cisco VPN Client HELP please

Discussion in 'Other Linksys Equipment' started by nick911, Dec 26, 2007.

  1. nick911

    nick911 LI Guru Member

    I have the above adsl router (V1.01.03) and i am trying to connect to my work via the Cisco VPN client ( The Laptop software is set ok, can connect via 3G and dial up. I have tried wireless and wired connection with no joy. Connection to the internet is fine.
    Hope this makes sense.

  2. Toxic

    Toxic Administrator Staff Member

    my guess is you will need to port forward UDP Ports 500 and 1000 to the IP your Cisco Client is using, or try enabling UPnP.

    Note: make sure your Client IP is static for port forwarding to work correctly
  3. nick911

    nick911 LI Guru Member

    Hi Simon,
    Many thanks for the relply, i set the laptop ip address to static, put the port fwding in the router and enabled upnp, still no joy :frown: Any other ideas, can i supply any event logs ?
    Many thanks again

  4. nick911

    nick911 LI Guru Member

    Just to give you an update, i have just borrowed a friends netgear router, put my logon details in, set it up and bingo i can connect to work. didnt need to change any settings in router :confused::confused::confused:
    Any ideas if i can get the linksys to work or should i bin it :eek::eek:

  5. LucF

    LucF Network Guru Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice