WAP + WRT for network.Any help?

Discussion in 'Cisco/Linksys Wireless Routers' started by Mobilex, Jan 12, 2005.

  1. Mobilex

    Mobilex Guest

    We used to have a wireless network with d-link products and now we re-organise it with linksys items as WAP54G and WRT54G.We have a base where the adsl and wire network is working and 2 substations where we want to send internet and also have a net, all as wireless.
    Because of buildings we can not have optic contact directly of the base to 2 substations.That's why we want to use a repeater (WRT54G) to have full wireless contact.The repeater must be the WRT54G because of the rf power.In base we will use a WAP54G as a bridge and in the 2 substations another 2 WAP's as AP.
    The firmware of WRT is the Alchemy 6.0r3 and for the base WAP the Linksys 2.07 original.Now, can any one help and give the necessary details and info of how to configure this 2 units (WAP bridge & WRT repeater) to work ok and without any problems?.Any help will be valueable!.Please reply.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice