WAP11 2.8

Discussion in 'HyperWAP Firmware' started by roamingnode, Dec 29, 2004.

  1. roamingnode

    roamingnode Guest

    Hi All,

    Is it possible to flash the Linksys WAP11 ver 2.8 with the HyperWRT firmware?
    I have 3 WAP11 ver 2.8 that I would like to increase there output power and if possible add SNMP and NAT to them.

    If the HyperWRT does not work can someone recommend a different firmware?

  2. hinethotspot

    hinethotspot Guest

    Please were you able to flask any fimrware that can increase the output of your WAP11ver2.8 ?
    I have a similar problem now. Can you please recommend the firmware you used to me ?
  3. fastpakr

    fastpakr Network Guru Member

    I'm in the same boat. There are four v2.8 WAP11's with matching boosters on my desk that are now worthless because the strongest (non) encryption they support is WEP128. Any info would be great. I know the 2.2's could be flashed with DLink firmware, but these use a different file format to upload firmware so it's not as easy (if the DLink firmware would even work on a 2.8 once installed...).
  4. SideshowBob1969

    SideshowBob1969 Network Guru Member

    Do you need the modified D-Link firmware for the WAP-11 ?

    I have modified a bunch of firmwares D-Link, US-Robotics, Etc...

    Let me now if you need the firmware by PM me.
  5. ph68linksys

    ph68linksys Serious Server Member

    > ... Do you need the modified D-Link firmware for the WAP-11 ?


    Would you help me to get some firmware to reflash a WAP11 V2.8 please?

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice