WAP54G - SNMP Monitoring

Discussion in 'Other Linksys Equipment' started by jvlalonde, Oct 29, 2004.

  1. jvlalonde

    jvlalonde Guest

    Is there a way to monitor a WAP54G with SNMP?
    I tried to get snmp Infos from my WAP54G but I could only get the system name, contact ...

  2. u3gyxap

    u3gyxap Network Guru Member

    That's all you can get.
  3. hj

    hj Network Guru Member

    How to stat speed, etc with SNMP on the WAP54G ?
    I enable the SNMP in the HTTP interface, but i look that the 163 port (SNMP) is not open...

    (WAP54 with 2.08 firwmare)
  4. PG

    PG Guest



    If you use Getif2.2 application(http://www.snmp4tpc.com/), you can do an snmp walk. Make sure that you load the necessary mibs. The device is telling you more for example the SSID or the mac addressen for security
    Software version, uptime, system name, system location.
    Devices with an snmp mib2 agent can tell you many things.

    Another usefull application is PRTG. This software allows you to monitor different kinds of network nodes.
    I'm very fond of this application and I monitor for example my draytek router which has an snmp mib2 agent inside.
  5. Wild_Weasel

    Wild_Weasel Network Guru Member

    I use PRTG with a WAG54G, works great, apart from the WAG only sends the incoming stats. The outgoing information stays at 0. I've logged a call with LinkSys in both the UK and US but neither seem to be able to help. I read about a lot of other people having the same problem, seems to be an issue with all version of the WAG54G firmware.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice