WAP54G/WPC54G and True Signal/Throughput/Range Enquiry

Discussion in 'Other Linksys Equipment' started by cobblers, Feb 16, 2006.

  1. cobblers

    cobblers Guest

    I would like to make a general enquiry about the Signal/Throughput/Range found when using this model.
    Considering pure LOS, standard environmental conditions (little interference if any)
    eg : Inside 5m /Signal Strength/Throughput/SNR to 10, etc then outside at 30m, 60m, 100m, 150m etc until lost connection.

    Since Linksys does not seem to publicise this type of info or even mention a detailed table on the receve sensitivity of many of its products I would be interested in hearing you opinions.
    [Please do not invent big fish stories, of over a Km. It would be rather petty.]
    The test should be conducted using only standard Antennae and FW.
    The table of course could be generalised for other models.
    There are some sites which include some interesting information on this theme but many are not updated.
    Throughput (Mbs) should be tested by using a Net tool, not by the Linksys Control Panel.

    PS Can anybody confirm the remarkable claims stated at this link :
    Go to Data Sheet and view the quoted guaranteed range.
    This is only one example.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice