WDS problems with WRE54G

Discussion in 'Tomato Firmware' started by akujind, Jan 22, 2007.

  1. akujind

    akujind Network Guru Member

    I have a WRE54G that worked when I was using DD-WRT, but with Tomato, it doesn't seem to be working. I'm currently running Tomato 1.03. I have the Wireless Mode on Access Point + WDS, and I've entered the WRE54G's MAC address. Does anybody have any advice?
  2. lengo lad

    lengo lad LI Guru Member

    Did you ever get this sorted out? I think I have the same problem . . .
  3. fastpakr

    fastpakr Network Guru Member

    Offtopic, but I hate those WRE's with a passion. Some of the worst designed firmware ever.
  4. xpiria

    xpiria Addicted to LI Member

    The first thing you have to do, with the repeater, is to shut down the wireless security ( wpa or wep ) on your router, after that you need to plug the repeater and push the button for autoconfiguration.
    At that point you are able to see the two blue lights.

    Ok it's not yet done. Plug the rj45 cable to repeater and type in the broswer. Turn on the security option and write there the key you are using. Push save and the device will restart ...

    Now go on the router and turn on the security as it was before.

    You can notice that everything is working !
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice