WET54G v3.1 no IP on ethernet, help pls.

Discussion in 'Networking Issues' started by brammieman, Feb 21, 2007.

  1. brammieman

    brammieman LI Guru Member


    I have a little trouble configuring my WET54G v3.1 bridge.
    ADSL broadband router with DHCP enabled. (sweex annex a)
    IP-range dhcp - 15
    Currently attached via DHCP:
    - 2 pc's (one via additional switch) Both get an IP from DHCP
    - 1 Wireless accesspoint linksys (wap55ag) also connected nicely and fully functional
    - 1 WET54G v3.1 new out of the box, resetted several times

    see below... thanks
  2. brammieman

    brammieman LI Guru Member

    By now the problem changed a little... (Forgot my speed/duplex setting being fixed)
    In short:

    Router with dhcp > WAP55AG > laptop via wireless = IP from dhcp
    Router with dhcp > WAP55AG > WET54g > Laptop via ethernet (wireless off) = No IP from dhcp. (nic is ok)
    WET54g shows to be connected in status screen (to the WAP55ag)

    What can be blocking DHCP? Should I enable something in the config of either of the devices?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice