WGA54G and the WRT54GS

Discussion in 'Networking Issues' started by Frustrated, Nov 16, 2004.

  1. Frustrated

    Frustrated Guest

    After over ten hours with linksys support, we still can't get connectivity with these two devices. Please help.


    The SSID is the same
    The channel is the same
    All security features are off
    Firmware has been upgraded on both devices

    When my adapter is plugged into the ethernet port on the router, when in the control panel for the adapter, it sees the wlan and can connect to it. Sig strength is being reported at 100%, it says connected, all the details are in sinc. When I disconnect the unit, I can not ping it nor get connectivity link it to my PC as a test.

    All help will be very appreciated.
  2. Rainman

    Rainman Network Guru Member

    On the WGA54G do you have the speed setting to "mixed" (I forgot what the actual setting was called) There were some issues with this and the latest firmware version

    I'm guessing you do not have any firewalls running (like norton ... ? )

    What have you set-up on both devices, please give a full list of anything not default.

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice