whose on my network?

Discussion in 'Cisco/Linksys Wireless Routers' started by tivoenthused, Dec 30, 2007.

  1. tivoenthused

    tivoenthused Guest

    I have the WRT54G (FW v3.03.1)... How do I check to see which IPs are on my network? The router only allows me to see DHCP assigned IPs in the client list, but I want to be able to verify the presence of other IPs on the network that weren't assigned by DHCP.

    Any idea how I can do this?

    Thanks in advance?
  2. HennieM

    HennieM Network Guru Member

    Can't remember clearly, but AFAIK the stock firmware does not show this.

    Look for Tomato, HypwerWRT Thibor, DD-WRT, or other third party firmware which would give you that and many more goodies.
  3. Toxic

    Toxic Administrator Staff Member

    using 3rd party firmware like tomato and telnetting into the device, then use

    cat /proc/net/arp

    should show you anything connected to the device.
  4. WARPed-too

    WARPed-too LI Guru Member

    You can go into your router GUI in the wireless area then go to the wireless MAC filter tab. There you should be able to click the wireless clients button and it would list all MAC address that are on your router via wireless. NOTE: you may need to temporally enable this feature.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice