WMP300N Problems

Discussion in 'Other Linksys Equipment' started by mr_density, Dec 21, 2008.

  1. mr_density

    mr_density Addicted to LI Member

    I got myself a linksys wmp300n v2 first I did my installation on a xp system wich did not work. During the installation on xp It asks for a file that is in the vista folder then the installation finishes and it shows the driver is not functioning.

    So i installed a vista system and installed the drivers, no everything is good and the card seems to work but I cant connect to my WRT610N with a N signal I can only connect to my G signal!

    What a horrible driver support! This is realy not acceptable for a company like linksys!

    Does someone have an idea what the problem is?
  2. guetali

    guetali LI Guru Member

  3. mr_density

    mr_density Addicted to LI Member

    Thanks the Atheros AR5008 works great!

    I played a lot with all the settings on my WRT610N (Eu) and I am getting a connection with 300 Mbps through the 2.4 ghz channel. When I set it at 40Mhz and wide channel 11 and standard channel 13. With other settings I get a 130Mbps or slower connection.

    I also tryied a lot of different settings with the 5Ghz channel but I have never seen that signal in my list of wireless connections through the WMP300Nv2. But my laptop see the connection so I know it is there! Looks like the WMP300Nv2 can't deal with 5Ghz signals.
  4. Ed50547

    Ed50547 Network Guru Member

    The WRT610N is a dual-band router, i.e., it functions on both the 2.4Ghz and 5Ghz band. But the WMP300N is a single band adapter, i.e., only 2.4Ghz. If you want a dual-band adapter, there's the WUSB600N, which would be able to use the 5Ghz band as well.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice