WPC54G v1 and v2 differences?

Discussion in 'Other Linksys Equipment' started by Toxic, Jun 24, 2004.

  1. Toxic

    Toxic Administrator Staff Member

    Anyone know the difference on the v1 and v2 of the WPC54G cards?
  2. Esquire

    Esquire Mesquire Staff Member Member

    No idea, Simon, apart from the new one carries the new Wi-Fi Certified logo for B ang G standards, while the old one is only certified for B.

    I couldn't even download the driver to take a look, but at least Linksys has been consistent in making their mistakes - this time incorrect driver version in the upgrade instructions.

  3. Esquire

    Esquire Mesquire Staff Member Member

    I managed to download the driver for V.2 just now.

    The ZIP file contains 2 sets of drivers. One is our old friend the Broadcom NDIS 5.0 driver version 3.30.15. The other is the new V.2 driver version, originally from Texas Instruments, so it appears V.2 is using TI chipset.
  4. yonnage

    yonnage Network Guru Member

    TI on a linksys

    According to my information, only the wpc11 v4 uses the ti chipset. i'll double check in the morning
  5. Esquire

    Esquire Mesquire Staff Member Member

    Download the V.2 driver and you should see a Linksys driver matching the driver version number and its corresponding INF containing references to TI as the manufacturer, which has led me to conclude it may be using a TI chipset.

    I just downloaded the V.4 driver from FTP since I couldn't find its product page. It contains the good old Broadcom driver (3.30.15) and 2 Inprocomm drivers (presumably as a set).

    Inprocomm is a company based in Taiwan.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice