Wre54g And Wap54g

Discussion in 'Other Linksys Equipment' started by crazydutchone, Feb 13, 2007.

  1. Hi,

    Since about 2 years now i had a WAP54G and WRE54G running perfectly until a few days ago I added security to the wireless. I decided that WPA-PSK would be the easiest to use and the most secure. so i started implementing it and the access point went smooth without any problems and the WRE didnt have WPA-PSK at first so updated the Firmware to 1.06.05 and to my relieve it did have WPA. so I set the Passkey, saved it and unplugged the device (was told to do this by helpdesk) and it worked for 3 hours and then well occasionally i get a signal but i guess thats from the WAP and not the WRE. Any suggestions had a look on the forum but couldnt find what i needed.

    Settings / setup:
    Firmware Version: 3.04
    MAC Address:  	  00:0F:66:10:ED:73
    Firmware Version: 1.06.05
    Connected to MAC Address: 00:0F:66:10:ED:73
    SSID = Linksys
    Chanel = 11
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice