WRE54G not repeating signal unless Same SSID *fixed*

Discussion in 'Other Linksys Equipment' started by ChemAce, Jul 9, 2006.

  1. ChemAce

    ChemAce LI Guru Member

    Will not work, unless, the SSID signal its repeating is equivalent to the setting on the extender.

    WRT54GS V4 SSID: linksys88A
    WRE54G V1 SSID: linksys88A

    Only works if SSID's are = to eachother

    any explanation?

    Previous releases have proved to be more lucrative than the newer ones...


    any help would greatly be appreciated,


    Firmware v.1.04 Removes the capability of manual MAC entry, thus removing individual SSID compatibility. Hope that helps anyone who needs this info. Stick with 1.04 =)
  2. HiSpeed

    HiSpeed Network Guru Member

    Curious because WDS repeating requires only to have the same channel... :eek:
  3. ChemAce

    ChemAce LI Guru Member

    No Clue, still workin on it, callin a linksys rep in a bit...
  4. ChemAce

    ChemAce LI Guru Member

    Just the darned Upgrades...

    The problem was they removed that capability after 1.04 firmware.... I rolled it back, all better =)

    thanks alot,
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice