WRT54-TM Tomato 1.23.7 - "Local Only" Help!

Discussion in 'Tomato Firmware' started by jhchoi24, Feb 26, 2009.

  1. jhchoi24

    jhchoi24 Guest

    Hello Everyone,

    I recently came from DSL to cable and obtained a WRT54-TM from a friend. I flashed it to dd-wrt and had it working perfectly and got curious and tried a flash to tomato. Every since then, I cant seem to connect to the internet and Windows Vista states "Local Only". I have tried to power cycle and reset the router to its default settings. I've restarted the router about 5 times and had 1 instance where it connected but got d/ced not too long after. I've read a lot of stuff about cloning the mac address, what are they referring to? Am I cloning my network adapter's MAC, modem's MAC, or router's MAC? Will this be worth a shot? Any suggestions/comments are appreciated.

    Thanks in advance.
  2. teddy_bear

    teddy_bear Network Guru Member

    Usually cloning is not necessary for cable. Have you tried to power cycle the modem, and then the router - in that order?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice