wrt54g v5 setup

Discussion in 'Cisco/Linksys Wireless Routers' started by Anonymous, Nov 2, 2005.

  1. Anonymous

    Anonymous Guest

    Hi there,

    I have a wrt54g wireless router and I'm trying to set the following configuration:

    PC connected to internet (via USB ADSL Modem) <- ethernet -> WRT54G v5 <---> other wireless and ethernet PC's

    so I can share the internet connection.

    Can someone provide me with a FAQ or explain how can I set this up or even if this is possible?

    Thanks in advance.
  2. Toxic

    Toxic Administrator Staff Member

    Does your ADSL modem have any Ethernet port?

    If so then the WRT54G plugs into that. Then your PC and other clients use to WRT54G to share access to the Modem/internet.

    if you dont have an ethernet port on the ADSL modem then you need to buy a new ADSL modem that supports it.

    using the PC to the gateway will slow your connection and maybe hard to setup.
  3. Anonymous

    Anonymous Guest

    well, thanks for your help but I think i've managed to configure it after some tweaking.

    I do not have an ethernet port on my USB ADSL modem, so I'll have to reconfigure the router's internet IP address every time I establish a new internet connection via the PC -- i think.

    thanks once again.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice