WRT54G v8

Discussion in 'DD-WRT Firmware' started by smartcap, Jun 5, 2007.

  1. smartcap

    smartcap Network Guru Member

    Has any1 here been successful @ upgrading v8.0 to DD-WRT?

    If not, are there any other firmwares out there that has support for this version?
  2. HarshReality

    HarshReality Network Guru Member

    No on both counts, currently due to the flash size DDWRT is the only firmware that would be applicable. Porting is underway but no prediction as to when it would become public.
  3. BrainSlayer

    BrainSlayer Network Guru Member

    the port is done. i just need a WRT54G v8 testunit todo the vxworks killer
  4. Toxic

    Toxic Administrator Staff Member

    Come on someone donate a v8 to Brainslayer!
  5. patbergschneider

    patbergschneider LI Guru Member

    Brainslayer... anybody... somebody have dd-wrt on a WRT54G v8 yet? This thread has been quiet for about a month.
  6. Mastec

    Mastec Network Guru Member

    Ver 8 has been successfully loaded with dd-wrt but you need a JTAG cable and a new cfe. Contact, I think his name is Tornado over at http://www.dd-wrt.com, he has the cfe needed. Also contact anectine17 for a JTAG cable
  7. patbergschneider

    patbergschneider LI Guru Member

    You guys pushing the boundaries of dd-wrt are so amazing. I respect and appreciate your work to give our hardware the ability to achieve its full potential.

    However, I'm not much for hardware modding, so I took back my WRT54G v8, and replaced it with a very dd-wrt-friendly Buffalo WHR-G125. Had it flashed and setup in just a few minutes.
  8. Hylian

    Hylian Network Guru Member

    You need a v8? Walmarts got em.... 54.08, bought one today
  9. Mastec

    Mastec Network Guru Member

    Who in their right mind wants a v8 Linksys when for less then $10 more can get a reliable WRT54GL or Buffalo?
  10. mudirem

    mudirem Guest

    WRT54G V8 Problems

    I sucessfully upgraded my WRT54G V8 router with Firmware: DD-WRT v24 RC-4 (09/21/07) micro. I am facing couple of issues.
    1) After switching on the power I have to connect to the router through the wired computer and re-boot the WRT64G router to get the wireless connection working

    2) Some times while browsing the internet the router just dies

    Did any one is facing the similar problems??

  11. incosto

    incosto Guest

    Eu Consegui Atualizar o meu WRt54G v8 para o DD-WRT v24 ontem (07/10/2007) com o Firmware dd-wrt.v24_micro_wrt54gv8-8102 mais recente, os outros Firmwares ele não aceitou!
    I Change my Firmware of my WRT54G v8 with the most recently firmware of DD-WRT v24 the dd-wrt.v24_micro_wrt54gv8-8102, because the old firmware he don´t accept...
    I change day 07/10/2007.. Successfully !
    No Jtag connector is neccessary! Forget that!

    I have a problem when i change the name of the SSID of he web wireless...
    The name of the SSID don´t appear in the searchs of my Card PCI Wireless...
    Anyone with the same problem??

    Sorry my bad, bad,bad english!
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice