WRT54GV2 + Freeman/Basic 1.0.4 = No WAN-Internet

Discussion in 'Other Firmware Projects' started by craig_oz_land, Oct 21, 2005.

  1. craig_oz_land

    craig_oz_land Network Guru Member

    Anyone else have this problem?

    Running DSL-302G D-Link modem in NAT mode.

    WRT54G is obtaining IP address 10.1.1.X from modem and shows correct subnet and default gateway

    Pinging 10.1.1.X on WRT54G side works.

    But no internet connectivity.

    Plug modem back into D-Link router and all is fine.

    What gives?
  2. whatsthedeal

    whatsthedeal Network Guru Member

    this happens when i reflash my router. i fix it by power-cycling the modem. you might also need to clone the mac address of the dlink router if your isp checks that.
  3. craig_oz_land

    craig_oz_land Network Guru Member

    Hi whatsthedeal and thanks but nope, tried all of that.

    The WRT54G is acting as the client at the WAN interface and receiving the IP address allocated by the DSL-302g just fine. There is just no data getting through.
  4. fizze

    fizze Network Guru Member

    erm, are you sure you set it up with the right WAN settings ?
    PPTP etc are all wrong here.

    I guess that you need static routes, or whatever mumbo-jumbo the Dlink router has set up.

    Im using freeman basi 1.04 on a V2 WRT54G over a speedtouch w/ PPTP for months w/o problems....
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice