wrt56gv2 static route table

Discussion in 'Cisco/Linksys Wireless Routers' started by noble, Nov 16, 2004.

  1. noble

    noble Network Guru Member

    is it possible to set a static route table for the wrt56gv2 running the latest eurpean firmware?

    if yes - how can i make this?
  2. fatoil

    fatoil Network Guru Member

    Try 'Setup' -> 'advanced routing'
  3. noble

    noble Network Guru Member

    i found it and tried it

    but i found an new problem

    i set up the PPTP connection and disconnected the PPTP
    i this case I got an LAN IP adress 172.16.x.x

    but for a client , which is connected with the router it is not able to PING any client in the LAN.

    and i dont know why, but static routing didnt fix the problem.

    so the main problem ist, that clients connected to the router are not able to communicate with the LAN, nor with the Internet via PPTP.

    Setting the Router to DHCP an PPTP pass-trough everything works fine.

    i find this very crazy, so is there a possibility to get another firmware oder something else?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice