WRV200 VPN setup

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by kenn23, Jun 16, 2006.

  1. kenn23

    kenn23 LI Guru Member

    Hello everyone, I was wondering if anyone had a configuration document on setting up the VPN on this thing.

    I am thinking of configuring it two ways.
    1) tunnel between QTY 2 WRV200's (One at office with static IP and other at home with Dynamic IP)

    2) WRV200 at one end and QuickVPN at other(if it works with the WRV200. I have another post asking this:))

    Just a little config info, The office is setup right now as a Windows domain with a Comcast business modem(has built in router also with no VPN functionality) 15 computers connect to internet thru that router. I need to add the WRV200 in there somehow for VPN.

    I think i need comcast to send me a normal cable modem. I can enter a staticIP on the WRV200. I am not sure it would work with Comcast router connected to WRV200 connected to network switch.

    Hope this is not to confusing:(
  2. Ponderous

    Ponderous LI Guru Member

    I am not sure if you or I will get a VPN setup using this excellent guide developed by DocLarge (for another WRVxx Router) but I am going to try this once I get the basics working on the router:


    Let me know if the guide is helpful... if I manage to get past the permanent "Acquiring Network Address" situation I am presently in... trying to configure a WPA connection, I will post back with my VPN experience using the document.

    Good Luck!
  3. Toxic

    Toxic Administrator Staff Member

    Please post in the correct forum. the WRV200 is a WRV router. not a WRT router.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice