WRV54G and Microsoft VPN - I give up

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Deleted member 11179, Mar 30, 2006.

  1. Is there a wireless router that you folks recommend that will pass GRE packets and perform NAT-T properly?

    thanks in advance.
  2. Toxic

    Toxic Administrator Staff Member

    Yes...as Doclarge told me.

    BEFVP41 router supports NAT-T and GRE.
  3. TazUk

    TazUk Network Guru Member

    Ah but the BEFVP41 isn't wireless ;) Of course you could just add a WAP54G to it to achieve the same thing :)
  4. Toxic

    Toxic Administrator Staff Member

    yep or a cheap WRT54G/GS with a 3rd party firmware for extra features.
  5. DocLarge

    DocLarge Super Moderator Staff Member Member

    You can look at the dlink di824vup, but, that's not linksy (sorry)

    Toxic sent me a link from Tom's networking that shows how to create an ipsec policy with the ms vpn client that might work for a connection:


    Keep in mind, passing GRE is needed "if" you're going to be running a vpn server behind your router whereas NAT-T allows interpretation of private ip addresses (needed mostly for vpn from behind a router to another remote endpoint).

    If you're trying to run a vpn server, the WRV54G "is not" going to do it, period. Look for the dlink di824vup, get a BEFVP41 with a WAP54G, or find a pre version 5 WRT54G with third party firmware :)

  6. Will a BEFVP41 work in conjunction with the WRV54G? That way I don't have to get rid of the WRV54G which works well as a wireless access point.
  7. TazUk

    TazUk Network Guru Member

    Yep you could still use the WRV54G as an AP, just connect it to the BEFVP41 via one of the LAN ports :)
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice