Tomato for ARM routers


Can we get a list of all the developers that worked on the tomato ARM port? I want to donate to all developers equally :D

All my routers (I have 4 so far) run shibby firmware, except for 1 router which is ARM which I've been running Rmerlin's ARM build on. I want to shibbify that router too as its an RT-AC56U but I'm unsure how unstable the new ARM firmware is and unsure which features work well and which don't.

I use the AC56U to handle VPN, transmission, as well as NSF fileserver functions. If anyone can chime in about those features and general stability I would be greatful.
 
Can we get a list of all the developers that worked on the tomato ARM port?
Click to expand...

Me (Shibby) and Tomato-RAF Team (Victek and roadkill).

I want to shibbify that router too as its an RT-AC56U but I'm unsure how unstable the new ARM firmware is and unsure which features work well and which don't.
Click to expand...

It`s very stable. I used RT-AC56 for last ~2 weeks. No any problems. Most of tomato`s features works. Only few is not fixed yet, like:
- bw monitor
- iptraffic monitor
- web monitor
- qos

and that should be all.

Best Regards.
 
shibby20 said:
Me (Shibby) and Tomato-RAF Team (Victek and roadkill).



It`s very stable. I used RT-AC56 for last ~2 weeks. No any problems. Most of tomato`s features works. Only few is not fixed yet, like:
- bw monitor
- iptraffic monitor
- web monitor
- qos

and that should be all.

Best Regards.
Click to expand...
almost;)
While adding a virtual wireless interface wl1.1 (5Ghz) works perfectly well, adding wl0.1 (2,4Ghz) changes the view of the Basic-Network-Page completely and allows no more saving there - even a reboot doesn't change this anymore. Nevertheless wl0.1 is up and clients can connect to it.

@blackjackel: OpenVPN-Server works perfectly well.

Kind rgds
Peter
 
plgvie said:
almost;)
While adding a virtual wireless interface wl1.1 (5Ghz) works perfectly well, adding wl0.1 (2,4Ghz) changes the view of the Basic-Network-Page completely and allows no more saving there - even a reboot doesn't change this anymore. Nevertheless wl0.1 is up and clients can connect to it.
Click to expand...
This's exactly what I encountered.

And expect that shibby will finally merge "GPL of ASUS RT-AC68U for firmware 3.0.0.4.374.5656" because this release fix the "CTF + PPPoE + ipv6 tunnel == router crash" problem.
 
Hi Shibby! Will it be possible to use 3-digit VIDs on tomato with the Netgear R7000? I'm trying to change my ISP's router which is very weak. My ISP uses 3-digit VIDs (100 for Internet, 101 for VoIP and 105 for IPTV).
 
Xenier said:
Hi Shibby! Will it be possible to use 3-digit VIDs on tomato with the Netgear R7000? I'm trying to change my ISP's router which is very weak. My ISP uses 3-digit VIDs (100 for Internet, 101 for VoIP and 105 for IPTV).
Click to expand...
You can use:
VID Offset
First 802.1Q VLAN tag 0 (range: 0 - 4080; must be a multiple of 16; set to 0 to disable)
Click to expand...
 
Dzieki Shibby jutro instaluje ;)
Does a new tomato firmware contain latest Netgear wifi driver? According dd-wrt (Kong) this driver is not working well and Broadcam will release new driver/update soon.
 
Last edited:
marekop said:
Dzieki Shibby jutro instaluje ;)
Does a new tomato firmware contain latest Netgear wifi driver? According dd-wrt (Kong) this driver is not working well and Broadcam will release new driver/update soon.
Click to expand...

What version is Netgear using? Asus is now on 6.37.14.86:

Code: 
wl0: Apr 25 2014 11:16:33 version 6.37.14.86 (r456083)
 
Upgrade from DD-WRT follow your instruction above. 5G works fine, but without 2.4G available.

And I restore all to factory in Tomato (Clear NVRAM, though mode), then it result in wireless lost (no wireless device and configuration could be found in Tomato).

----
Update: I reboot it and 2.4/5G wifi did appear. It seems no problem now.
Thanks Shibby's great Tomato in Netgear R7000.
 
Last edited:
Hi Shibby, thank you for your hard work.
But is it Possible to make a List at your HP too what is working and what not working at the Moment?! I know there is the one Post here but maybe others Need this too.

Thanks.

PS: Test the FW This Night *crossing fingers*
 
You must log in or register to reply here.

Back
Top